Parallax 28014 Parallax USB Oscilloscope

DESCRIPTION: 
The Parallax USB Oscilloscope is now available individually. We also present this scope in a complete parts and text kit here.

The hardware connects to your PC via USB. The hardware is small, portable, elegant and requires no power supply. The case is powder-coated aluminum.

All oscilloscope controls are managed through a point-and-click PC interface. The software provides an easy method of obtaining quality screen captures for reports and live demonstrations. You will have the ability to measure acquired waveforms with easy-to-use cursors. Common scope features including trigger settings, waveform measurements (MIN, MAX, frequency, period), ability to save customized setups, BMP screen captures, etc are standard in the software. Special features include 3 cursor functions with the option to snap to the waveform. The cursors operate in zoom mode, allowing close viewing and precise measuring of signals.

Technical Specifications:

• 2 Channels
• 1 Ms/s Maximum Sample Rate with One Channel
• 500 Ks/s Sample Rate with Two Channels
• 20 Vpp Maximum Input for Channel 1 and Channel 2
• 200 kHz Bandwidth
• 8-Bit Vertical Resolution
• 1 M Ohm Input Impedance
• Trigger on Rising or Falling Edge at any Voltage
• Variable Trigger voltage on Channels 1 and 2
• Horizontal Trigger Position Settings at 10%, 50%, and 90%
• Auto and Normal Trigger Modes
• 3 probes
• USB 1.1 Support (no additional power supply required!)
• Size: 5 x 2.25 x 1.5 (in.); 12.7 x 5.7 x 3.8 (cm)
• Weight: 8 oz; 227 gm
• Parallax Digital Oscilloscope Software CD-ROM (download and evaluate for free below)
• Additional benefits: 14-day return for refund and 90-day workmanship warranty; free Parallax technical support by e-mail and phone; free software upgrades

System Requirements

Minimum** configuration:

• Windows 98 or higher operating system*
• Pentium 233 MHz processor
• 32 MB of RAM
• At least 15 MB of free disk space
• Graphics card able to display an 800 X 600 resolution at 16-bit color depth.
• HTML Viewer
• Mouse or similar pointing device

Recommended** configuration:

• Windows XP
• Pentium II 450 MHz processor
• 64 MB of RAM
• 20 MB free disk space
• Graphics card able to display a 1024 X 798 or higher resolution at 32-bit color depth.
• HTML Viewer
• Mouse or similar pointing device

* - Windows 95 and NT are not supported, Windows XP is recommended.
** - Performance is based on CPU speed.

Downloads:

FTDI USB VCP Drivers (.zip)
BOE USB Install for WinXP (.pdf)
BOE USB Install for Win 2k(.pdf)
BOE USB Install for Win ME (.pdf)
BOE USB Install for Win 98 (.pdf)
Oscilloscope Software and Installation Instructions page
Understanding Signals Text (.pdf)
Understanding Signals Source Code (.zip)

Resources:
Components Listing
Screen shot image (.jpg)
Consider the Understanding Signals Parts Kit and Text (includes scope)