The PropScope is a two-channel oscilloscope that is capable of reading 25 million samples per second with ten bits of resolution over one, two, ten, or twenty volt peak-to-peak waveforms. Power is provided through the USB port requiring only a single cable to connect the PropScope to any laptop or desktop PC.

A built-in expansion port allows additional capabilities and upgrades, by simply plugging in an expansion card. A PropScope DAC card is even included, providing an analog trigger, a four-bit digital trigger, an eight-bit digital to analog converter, and a four-bit NTSC/PAL output. Other cards will be available to add even more useful features.

The included software provides a traditional scope interface along with auto measurements and the ability to store and export waveforms. The software also provides features not normally available in a stand-alone oscilloscope, including a function generator, a logic analyzer, a spectrum analyzer, a vector-scope, and more.

Features:

• 2 input channels
• 25 Msps Maximum Sample Rate
• 20 Vpp maximum input range (-10 V to +10 V when DC-coupled)
• 10-bit input resolution over either the entire 20 Vpp range, or selectable 10, 2, and 1 Vpp ranges.
• 1x/10x selectable probes

Included Expansion Card Features:

• External analog trigger with a -10 V to +10 V input range
• 4-bit digital input and trigger
• Arbitrary waveform generator with an 8-bit DAC and selectable -1.5 to 1.5 and 0 to 4.9 voltage ranges
• 4-bit DAC for generating NTSC and PAL signals

Key Specifications:

• Power requirements: USB powered
• Communication: USB
• Dimensions: 2.71 x 4.67 x 1.08 in (68.8 x 118.6 x 27.4 mm)
• Operating temp range: +32 to +158 °F (0 to +70 °C)