AUTHORIZED DISTRIBUTOR

WELLER WR3000SA  Digital Rework System, 3 Function with DXV80, WP80 and HAP200 (original product sealed from factory)

The Weller WR3000SA is a multi-channel hot air desoldering/soldering rework system.

Weller WR3000SA Features:

• 400 watts of power over three independently controlled channels
• Application flexibility with up to 21 controllable tool options
• ESD-safe
• Up to 200 watts of hot air power for efficient lead-free rework
• Less than 5 seconds hot air time to temperature performance
• Continuous productivity with no end of cycle hot air cool down time
• Unmatched tool air flow volume of 1/15 L/min
• Up to 120 watts of desoldering power for demanding ground plane and multi-layer boards(optional)
• Up to 200 watts of soldering power for unmatched application versatility(optional)
• Connectivity to low voltage preheating plates and soldering baths
• System operational right out of the box with all critical components and tips supplied
• Sustainability of new tool developments with field accessible firmware update port
• Included PC software enables PC connectivity and data logging capabilities
• No system cooling requirements ensures lowest operational costs
• Large, intuitive LCD display shows critical functions for all 3 channels
• Temperature stability of ±2°C/±4°F for superior reliability
• Rotary vane vaccum pump for long life and quiet operation
• Meets or exceeds mil-std and J-std 001E industry spec

Weller WR3000SA Specifications:

WR3ME Rework station
• Power consumption: 400W
WP80 Solder iron
• Power consumption: 80W
DXV80 Desolder iron
• Power consumption: 80W
• Heat-up time: 35 sec.(50-380°C)
WMRT Soldering/rework tweezers
• Power consumption: 80W
HAP200 Hot air iron
• Power consumption: 360W

Product Description

Weller WR3000SA WR3ME Rework System with DXV80, WP80 & HAP200 The Weller WR3000SA is a multi-channel hot air desoldering/ soldering rework system. The Weller WR 3M is a versatile Rework System for making professional repairs to current technology electronic assemblies in the industrial production and engineering sectors. The WR 3M has 3 independent channels for operating 3 tools simultaneously. Fast and precise sensor sampling in the closed loop control provides temperature accuracy and maximum temperature control under load. All tools are recognized automatically by the WR3M and the appropriate control parameters are set. The desired temperature can be adjusted in the range of 150°F to 999°F for hot-air tools and the WSP150 Soldering Iron; 150°F to 850°F for all other soldering / desoldering tools. Set and Read values are displayed in digital form. Three Radio Buttons are used to select fixed / pre-set temperatures directly. The Heater Control Indicator ("a“ symbol in the display), along with a green LED above the port being monitored, flashes to indicate when the Set temperature has been reached.   Weller WR3000SA Specifications   WR3ME Rework station WP80 Solder iron DXV80 Desolder iron WMRT Soldering/ rework tweezers HAP200 Hot air iron Power consumption: 400W 80W 80W 80W 360W Heat-up item:     35 sec.(50-380°C)