The Weller WD1M is a micro digital rework power unit compatible with WMRS soldering pencil and WMRT desoldering tweezers.

Weller WD1M Features:
• ESD-safe to protect sensitive components
• Compatible with WMRS soldering pencil and WMRT desoldering tweezers
• Three "radio buttons" allows pre-set of frequently used temp settings
• Large high contrast LCD display
• Setback Time: Allows programming of the number of minutes (1-99), before the temperature sets back to idle mode
• Standby Temperature: Allows the selection of desired setback temperature, down to 200°F
• Temperature Lockout: Allows the supervisor to easily set a temperature that cannot be changed by the operator
• F°/C° Switching: Allows the temperature display to read in either °F or °C, depending on your process or preference
• Temperature Offset: Allows the display temperature to be adjusted ± 72°F when working with higher mass tips, where the temperature reading can be affected by the mass of the tip
• Auto-Off Time: Allows programming of the number of minutes of inactivity (1-999), before the station powers off automatically
• Voltage: 120V (input); 24V (output)
• Footprint: 5.27" x 4.25" x 5.77" (134 x 108 x 147mm)
• Max Power Consumption: 160W
• Temperature Range: 150°F - 850°F (50°C - 450°C)
• Temperature Accuracy: ± 17°F (± 9°C)