TPI 194 True RMS 50,000 Count Digital Multimeter with CAT IV, 1000V rating

CAT IV 600 ACV, data logging, 0.05% accuracy, 50,000 count, True RMS DMM with separate fuse and battery compartment. AC/DC volts, AC/DC amps, resistance, audible continuity, diode test, frequency, capacitance, and temperature. Plus: db,inductance, conductance, duty cycle, pulse width and time stamp logging.

Includes

A190 Protective Boot;
A085 UL Listed Silicone Test Lead Set with Alligator Clips (Screw On);
A104 0.5 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each);
A110 10 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each);
Battery;
Instruction Manual;

Features

Data logging
50,000 count display
0.05% DCV basic accuracy
True RMS
Inductance
Frequency
Capacitance
0 to 750 ACV; max resolution 100uV
0 to 1,000 DCV: max resolution 0.001mV
0 to 50MΩ; max resolution 0.01Ω
Audible continuity
AC/DC amps up to10 amps; resolution 0.01 uA
Analog bar graph
Min/Max
Data hold
Power off
Separate fuse and battery compartment

Applications:

Thermocouples in furnaces or gas applications
Heat anticipator current in thermostats
Line voltage
Control circuit voltage
Flame safeguard control current
Heating element resistance (continuity)
Compressor winding resistance
Contactor and relay coil resistance
Continuity of wiring
Motor start and run capacitance
Frequency on controls and line voltages
Record min/max voltage of controls and line voltages
Temperature with optional temperature adapter (A310)
Bar graph to indicate rapid fluctuations in measurements
Voltage of direct drive DC motors
Measure power supply voltage
Match components
Compare readings in circuits and components
Frequency of line and control voltage

Specifications:

DC Volts
- Maximum Input: 1000V
- Maximum Resolution: 0.001mV
- Accuracy: +/-0.05%
AC Volts
- Maximum Input: 1000V
- Maximum Resolution: 100μμV
- Accuracy: +/-0.4%
DC Amps
- Maximum Input: 10A
- Maximum Resolution: 0.01μA
- Accuracy: +/-0.15%
AC Amps
- Maximum Input: 10A
- Maximum Resolution: 0.01μA
- Accuracy: +/-0.75%
Resistance (Ohms)
- Maximum Input: 50MΩ
- Maximum Resolution:
- 1mΩ Accuracy: +/-0.05%
Frequency
- Maximum Input: 5MHz
- Maximum Resolution: 0.001Hz
- Accuracy: +/-0.05%
Capacitance
- Maximum Input: 20mF
- Maximum Resolution: 0.01nF
- Accuracy: +/-2%
Inductance
- Maximum Input: 300mH
- Maximum Resolution: 0.01mH
- Accuracy: +/-5%
Temperature (K-Type Thermocouple)
- Maximum Input: -54°F to 2462°F (-50°C to 1350°C)
- Maximum Resolution: 0.1°F / °C
- Accuracy: +/-2%
Continuity Audible at less than 10Ω
Diode 3V at 1mA maximum output
Duty Cycle Maximum Input: 99.9%
Maximum Resolution: 0.1%
True RMS Responding Yes
Conductance Yes
Pulse Width Yes
Data Hold Yes (Two hold system)
Min/Max Record Yes
Time Stamp Logging Yes
Relative Mode Yes
Compare Mode Yes
RS-232 Output Yes, Optically Isolated
Process Loop Output No
Sleep Mode / Auto Off Yes
Protective Boot Yes (standard)
Display Type 50,000 count backlit LCD with dual sub displays and analog bargraph
Range Selection Auto / Manual
Operating Temperature 32°F to 113°F (0°C to 40°C)
Storage Temperature -4°F to 140°F (-20°C to 60°C)
Humidity 80% non-condensing
Size 8.3” x 3.7” x 1.9” (210mm x 95mm x 47mm) without boot
8.7” x 4.3” x 2.6 (220mm x 110mm x 65mm) with boot
Weight 1.3lbs (570g) without boot 1.9lbs (850g) with boot
Battery Type 9V Alkaline (NEDA 1604)
Battery Life 50hrs Typical
Overvoltage Category CAT IV 600V
Agency Approval cULus 61010-1, IEC 61010-1
Warranty Limited Lifetime

Tell a Friend

Cart Contents

Your cart is currently empty

Subtotal: $0.00

View Cart

Order Info

TOLL FREE: 800-379-6664
INTERNATIONAL:954-574-0345

SCHOOL PURCHASE ORDERS:
FAX: 954-574-9528

INTERNATIONAL ORDERS:
MONEY ORDER,WESTERN UNION, OR BANK WIRE
(NOT INCL. CANADA)